Last updated: October 19, 2026
Fractional laser skin resurfacing treats small, spaced areas of skin with laser energy while leaving surrounding skin untreated to support healing. At CosmetiCare in Newport Beach, California, we offer fractionated, ablative Core CO2 resurfacing for adults seeking improvement in concerns such as wrinkles, scars, uneven texture, and sun damage.
What Is Fractional Laser Skin Resurfacing?
Fractional laser skin resurfacing directs laser energy into microscopic treatment zones rather than treating an entire surface uniformly. At CosmetiCare, our Core CO2 laser removes targeted outer skin layers and encourages collagen remodeling as the skin heals. “Fractional” describes the treatment pattern, not the laser type; fractional treatments can be ablative or nonablative.
How do fractional laser microbeams treat skin while leaving surrounding areas untouched?
Think of the pattern as closely spaced dots: treated columns sit beside untreated skin. Johns Hopkins Medicine explains that this approach delivers less energy across the whole area than full-field resurfacing and may reduce side effects and recovery time. Untreated skin supports healing, but the treated areas still need aftercare.
How does CosmetiCare use its Core CO2 laser for resurfacing?
Our Core CO2 laser treatment is a nonsurgical, ablative procedure. Its adjustable settings let our team focus treatment on selected areas and control how much outer skin is removed according to the treatment plan. The controlled injury also prompts collagen remodeling. For a broader explanation of the technology, see our guide to laser skin resurfacing.
What Skin Concerns Can Fractional CO2 Resurfacing Improve?
Fractional CO2 resurfacing can improve the appearance of fine lines, wrinkles, acne scars, uneven texture, blotchiness, age spots, and sun damage. The degree of improvement depends on the concern, skin characteristics, and treatment settings. Core CO2 resurfacing is not a guaranteed correction for every mark or a substitute for treatment of significant sagging skin.
Does fractional laser resurfacing work?
Yes, fractional laser resurfacing can produce visible improvements, particularly in texture and discoloration, but results differ from person to person. Mayo Clinic identifies fine lines, age spots, and uneven facial color among the concerns laser resurfacing is commonly used to address.
Can fractional CO2 treatment help acne scars and sun spots?
Laser resurfacing for scars aims to soften their appearance, not erase every scar. At CosmetiCare, we also use Core CO2 treatment for blotchiness and age spots associated with sun damage; the depth and extent of treatment depend on the area being addressed. Melasma may respond differently from age spots, and ablative CO2 treatment can cause pigment changes, so the two should not be treated as identical concerns.
Who Is a Good Candidate for Core CO2 Resurfacing?
A potential Core CO2 candidate wants improvement in wrinkled, sun-damaged, scarred, or uneven facial skin and can follow healing and sun-protection instructions. Suitability also depends on skin tone, medical history, and the amount of downtime a person can accommodate. A device that can treat many skin types does not carry identical risks for everyone.
How do skin tone, skin history, and treatment goals affect candidacy?
We consider skin type, thickness, texture, and tone when planning Core CO2 settings. Someone focused on fine lines may need a different approach from someone focused on acne scars or broader discoloration. A history of pigment changes or slow healing may influence the choice of laser and settings.
Who Should Avoid Fractional Lasers?
People with an open wound, active facial infection, or active acne breakout should defer fractional ablative CO2 treatment until the skin has healed or the condition has cleared. Burns, recent sun exposure, and pregnancy or breastfeeding are also reasons to discuss deferring treatment. Other skin or health factors may change the recommendation, making a candid history review essential before scheduling.

What is the downside of laser resurfacing?
Expected short-term effects can include soreness and redness; more intensive ablative treatment may take longer to heal. Possible complications include infection, darker or lighter pigmentation, prolonged redness, and scarring. The American Society of Plastic Surgeons’ recovery guidance also identifies cold sore reactivation as a possibility and describes scarring as rare but possible. Fractional treatment leaves surrounding skin intact, but Cleveland Clinic cautions that deeper penetration with fractional CO2 can increase the risk of complicated healing and scarring.
Seek urgent medical care for fever, rapidly spreading redness, worsening pain, pus, or a new vision problem after facial treatment. Discuss your own risks and whether treatment should be delayed with your treating clinician.
What should patients disclose before scheduling treatment?
Tell our team about active infections, open wounds or acne breakouts, cold sores, burns, recent sun exposure, pregnancy or breastfeeding, pigment concerns, medications, diabetes or other chronic conditions, smoking, and any history of difficult healing. These details help the treating clinician decide whether to proceed, adjust the plan, or wait. The American Board of Cosmetic Surgery advises stopping smoking at least two weeks before and after laser treatment to help avoid healing complications. That is general guidance, not a stated CosmetiCare protocol; discuss your own plan with your clinician.
A 2025 expert consensus on fractional ablative CO2 facial treatment gathered responses from international dermatologists and plastic surgeons. The figures below describe what panelists reported as contraindications or preventive practices; they are not rates of complications in patients or a statement of CosmetiCare’s prescribing practices. The panel was modest in size, so its responses should guide questions rather than predict an individual outcome.
| Panel finding | Reported figure | Source |
|---|---|---|
| Dermatologists and plastic surgeons on the panel | 21 | 2025 expert consensus |
| Panelists identifying active facial infections as a contraindication | 95% | 2025 expert consensus |
| Panelists identifying burns, recent sun exposure, and pregnancy or breastfeeding as contraindications | 67% | 2025 expert consensus |
| Panelists reporting bacterial and viral prophylaxis | Over 90% | 2025 expert consensus |
What Happens During a Core CO2 Laser Session?
We review your concern and treatment area, then choose adjustable Core CO2 settings to match your plan. Topical anesthetic may be used before we treat the selected skin with the laser. Before you leave, we review skin-care and sun-protection instructions for healing.

How is discomfort managed during fractional CO2 treatment?
Discomfort during and immediately after Core CO2 treatment is generally mild, and we can use a topical anesthetic when appropriate. For context, the expert consensus panel reported the following approaches in its members’ practices. These survey findings do not mean that every option is offered or needed at CosmetiCare.
| Discomfort-management approach | Panelists reporting use | Source |
|---|---|---|
| Topical anesthetic cream | 95% | 2025 expert consensus |
| Nerve blocks | 81% | 2025 expert consensus |
| Oral analgesics | 62% | 2025 expert consensus |
How long does a Core CO2 session take?
At CosmetiCare, most Core CO2 laser sessions take less than an hour. The time depends on the extent of the area and concerns being treated.
How Long Does Recovery Take After Fractional CO2 Resurfacing?
Recovery after fractional CO2 resurfacing varies with treatment intensity and the individual. At CosmetiCare, patients can expect some soreness and redness for a few days. Treated skin can peel, swelling is possible, and deeper ablative treatment may involve more healing time. Fractional treatment can shorten recovery compared with full-field resurfacing; it does not remove the need to plan for downtime. For a closer look, our day-by-day CO2 laser resurfacing recovery timeline describes how healing may change over time.
For perspective, Cleveland Clinic’s laser resurfacing guidance gives these general recovery estimates, which are not a personalized Core CO2 schedule:
| Treatment described | General recovery estimate | Source |
|---|---|---|
| Fractional laser resurfacing | One full week | Cleveland Clinic |
| CO2 laser resurfacing generally | Up to two weeks | Cleveland Clinic |
The one- and two-week estimates are general recovery or downtime guides, not assurances that the skin surface will be completely healed by then. The 2025 expert consensus on fractional ablative CO2 treatment reports re-epithelialization—the restoration of the skin surface—between 8 and 42 days after treatment. That reported range does not predict an individual Core CO2 patient’s healing time.
Redness may outlast the initial healing period. The American Society of Plastic Surgeons notes that new skin can remain pink for two to three months; the pinkness can take up to a year to fade.
What aftercare helps protect healing skin?
Follow the skin-care instructions provided for your settings. The American Society for Dermatologic Surgery recommends avoiding sun exposure for four weeks after fractional resurfacing. Use the protective products in your aftercare plan; the American Society of Plastic Surgeons says Retin-A and glycolic acid products may generally be resumed around six weeks after resurfacing, or as directed by your physician. Contact our team if healing does not seem to follow the expected course or if you have questions about an aftercare instruction.
When Will Results Appear, and Might Another Session Be Needed?
The American Society for Dermatologic Surgery notes that many patients observe positive changes within a few days of fractional resurfacing; that is not a promised timeline for Core CO2. Results become clearer as skin heals and may need to be assessed after additional sessions. Mayo Clinic notes that improvements after laser resurfacing can last for years, although results vary and sun-related discoloration can return with further sun exposure. Some pigmentation concerns may require repeat Core CO2 treatments, and the likely benefit and number of sessions depend on the condition being treated and the individual response.
How do early pigment changes differ from longer-term skin improvements?
Removing targeted outer skin layers can make some discoloration look improved as the area heals. Changes in roughness, scars, and fine lines may become clearer later, after the healing process has progressed. Early redness can temporarily obscure the result, so an immediate appearance is not a final result. Ongoing sun protection also matters for preserving improvement in sun-related discoloration.
How Does Core CO2 Compare With Other Resurfacing Options?
Core CO2 is our ablative CO2 laser, while Fraxel is a brand associated with fractional laser treatments; the device and settings must be specified before their effects or recovery can be compared. Erbium resurfacing and nonablative fractional lasers offer different trade-offs, and a chemical peel uses chemical exfoliation rather than laser energy. We can help you weigh your concern, skin characteristics, and acceptable downtime when considering these approaches:
| Option | Method | Recovery consideration |
|---|---|---|
| Core CO2 | Fractional ablative CO2 laser with adjustable settings | Cleveland Clinic estimates one full week of recovery for fractional laser resurfacing generally. |
| Fraxel | Brand of fractional laser treatments; the particular device determines whether it uses CO2 | Depends on the device and settings. |
| Erbium resurfacing | Erbium laser treatment can remove skin layers to address lines and wrinkles. | Cleveland Clinic notes fewer side effects and potentially faster recovery than with CO2 resurfacing, and says erbium may be a good choice for darker skin tones. |
| Nonablative fractional resurfacing | Fractional laser treatment that does not remove the skin surface | Recovery is generally shorter than with ablative treatment. Mayo Clinic says nonablative results tend to develop gradually and favor improvements in texture and color over wrinkles. |
| Chemical peel | A chemical solution exfoliates skin. | Varies with the type and depth of peel. |
Is Fraxel the same as fractional CO2 resurfacing?
Not necessarily. Fraxel is a brand, while fractional CO2 describes a laser resurfacing method. A Fraxel treatment may use CO2, depending on the device; its depth and recovery cannot be assumed to match our Core CO2 treatment.
When might a chemical peel be a better fit?
A superficial chemical peel may be an option for surface-level discoloration or texture changes when you prefer chemical exfoliation to ablative laser treatment. Its recovery still depends on the peel’s depth. CosmetiCare also offers chemical peels; our guide to chemical peels for acne and acne scars explains that option in more detail.
Frequently Asked Questions
How many fractional laser resurfacing sessions will I need?
You may need more than one session. Mayo Clinic says fractional ablative and nonablative resurfacing typically require 2 to 4 treatments for noticeable results, scheduled over weeks or months. At CosmetiCare, we tailor the number of Core CO2 sessions to your concern and how your skin responds.
How long should I avoid sun exposure before fractional laser resurfacing?
The American Society for Dermatologic Surgery advises avoiding sun exposure for two weeks before fractional resurfacing. Follow the sun-protection guidance in your aftercare plan following treatment.
Can Core CO2 resurfacing be combined with other treatments?
We may combine Core CO2 with Morpheus8, a facelift, or a neck lift when that fits your goals. Your treating clinician can discuss whether to combine or sequence procedures and what recovery each plan would involve.
Is fractional CO2 laser resurfacing suitable for darker skin tones?
Darker skin does not automatically rule out laser treatment, but ablative CO2 resurfacing carries pigment-change risks. An article on the American Board of Cosmetic Surgery website recommends nonablative fractional lasers for skin of color. At CosmetiCare, we assess your skin tone and pigment history before deciding whether Core CO2 or another approach is appropriate.
Can fractional CO2 resurfacing trigger cold sores?
Yes. Laser resurfacing around the mouth can reactivate cold sores, according to the American Society of Plastic Surgeons. If you have a history of cold sores, antiviral medication before and after treatment may help prevent reactivation.
Can laser resurfacing cause acne or small white bumps afterward?
Yes. Acne flares and milia—small white bumps that can appear during healing—are possible after laser resurfacing, according to the American Society of Plastic Surgeons. Follow your individualized aftercare instructions rather than starting acne products on healing skin. Contact our team if a breakout becomes painful or worsens, or if you are unsure how to care for new bumps.
How Can You Decide Whether Core CO2 Resurfacing Fits Your Goals?
Decide what improvement would matter most to you and whether the expected recovery fits your schedule. Make a note of any reactions to earlier skin treatments and the products you currently use so these can inform your treatment and aftercare plan.
If you are considering fractional laser skin resurfacing in Newport Beach, California, contact CosmetiCare for an individualized Core CO2 consultation. Our team can help you understand whether the treatment fits your skin, priorities, and recovery plans.
This information is general and is not medical advice. Talk to a licensed clinician about your own situation before making a treatment decision.
